Standards & Certifications

I.  PROVISIONS TECHNICAL STANDARDS PRODUCTS WIN COMPANY SAIGONDOOR BRAND

Some key door products of the company

• HDF . wooden door
• Wing thickness 38 mm (± 2). Maximum wing height no more than 2140 mm
• Enclosure 40 x 110 mm (± 2) or according to wall thickness; splint 2 sides 40 x 10 mm made of natural wood.
• Outside are 2 HDF panels
• Inside is a natural wooden skeleton that has been treated to eliminate wood grain and prevent warping.
• Finishing paint.
• Dimensions are produced according to the actual requirements of the customer
• The maximum frame cover height is not more than 2180 mm

• Wing thickness 38 mm (± 2). Maximum wing height no more than 2140 mm
• Enclosure 40 x 110 mm (± 2) or according to wall thickness; splint 2 sides 40 x 10 mm made of natural wood.
• Outside are 2 panels of HDF Veneer
• Inside is a natural wooden skeleton that has been treated to eliminate wood grain and prevent warping.
• Finishing paint.
• Dimensions are produced according to the actual requirements of the customer
• The maximum frame cover height is not more than 2180 mm

• Wing thickness 38 mm (± 2).
• Enclosure 40 x 110 mm (± 2) or according to wall thickness; splint 2 sides 40 x 10 mm made of natural wood.
• Outside are 2 panels of MDF Veneer
• Inside is a natural wooden skeleton that has been treated to eliminate wood grain and prevent warping.
• Finishing paint.
• Dimensions are produced according to the actual requirements of the customer
• The maximum tanning height is not more than 2400 mm

• Wing thickness 38 mm (± 2).
• The wing structure is made of plastic or molded plastic or wood plastic (optional).
• High quality PVC frame. Frame 55 x 100 (± 2).
• Wood grain coating.
• Dimensions are produced according to the actual requirements of the customer

• Wing thickness 38 mm (± 2).
• Wing structure made of solid wood plastic.
• High quality PVC frame. Frame 55 x 100 (± 2).
• Wood grain coating or wood grain paint
• Dimensions are produced according to the actual requirements of the customer

• Wing thickness 38 mm (± 2).
• ABS plastic wing structure
• High-grade synthetic plastic frame with steel core reinforcement inside, frame 45 x 110 (100) (± 2).
• The surface is DeCo-Sheet turpentine for a surface like real wood grain, not hygroscopic.
• Dimensions are produced according to the actual requirements of the customer

• Door thickness 45/50/55 mm (± 2). .
• Solid wood frame 45/50 mm x 110 mm (± 2)..
• Door core uses fireproof material 27(± 2) mm thick.
• Two fireproof panels, each 5/6/8 mm thick, pressed on both sides of the core.
• The outermost layer is 3mm thick flame retardant treated veneer.
• Join prevents fire, prevents smoke from running along the frame.
• The maximum tanning height is not more than 2400 mm
• Dimensions are produced according to the actual requirements of the customer

• Door overall thickness 40 mm (± 2)..
• 1.2/1.4/1.5 mm thick galvanized cold steel frame.
• Galvanized cold steel door 0.8/1/1.2 mm thick.
• Frame thickness 45 x 100 (± 5 mm).
• Rubber joint along the frame.
• Fire retardant Honey – Comb paper/fiberglass.
• Door set includes (wing, frame, complete paint).
• The maximum tanning height is not more than 2400 mm
• Dimensions are produced according to the actual requirements of the customer

Sorry, no pages was found